From dirk at haun-online.de Thu Jun 2 09:10:18 2011 From: dirk at haun-online.de (Dirk Haun) Date: Thu, 2 Jun 2011 15:10:18 +0200 Subject: [geeklog-devel] More automation (was: Feature freeze) In-Reply-To: References: <57C39EB5-B1D6-402F-A443-80056A25B04C@haun-online.de> <7C5262C3-AC61-448B-8252-2F7E5B4D2FD3@haun-online.de> Message-ID: <2A011EE6-9E49-4CC3-BAA9-F1741ECFDF25@haun-online.de> > And removing a tag (like the fake geeklog_1_8_0rc2) also works as expected, i.e. it doesn't do anything :) > > So this part of the release process is ready now ... Today's geeklog_1_8_0rc2 tag was real :) --- snip --- New release tagged: geeklog_1_8_0rc2, i.e. geeklog-1.8.0rc2 Checking out geeklog_1_8_0rc2 ... requesting all changes adding changesets adding manifests adding file changes added 7913 changesets with 25821 changes to 2945 files updating to branch HEAD 1820 files updated, 0 files merged, 0 files removed, 0 files unresolved Preparing geeklog-1.8.0rc2 archive ... geeklog-1.8.0rc2.tar.gz created. Sent geeklog-1.8.0rc2.tar.gz to www.geeklog.net Archiving artifacts Recording fingerprints No emails were triggered. Finished: SUCCESS --- snip --- http://project.geeklog.net:8080/job/geeklog-release/40/console So all I had to do on the other end was to write the release announcement and approve the file from the File Management's submission queue. This is such a huge improvement over the previous process which required half a dozen manual steps ... bye, Dirk From websitemaster at cogeco.net Wed Jun 8 09:22:00 2011 From: websitemaster at cogeco.net (Tom) Date: Wed, 8 Jun 2011 09:22:00 -0400 Subject: [geeklog-devel] More automation (was: Feature freeze) In-Reply-To: <2A011EE6-9E49-4CC3-BAA9-F1741ECFDF25@haun-online.de> References: <57C39EB5-B1D6-402F-A443-80056A25B04C@haun-online.de> <7C5262C3-AC61-448B-8252-2F7E5B4D2FD3@haun-online.de> <2A011EE6-9E49-4CC3-BAA9-F1741ECFDF25@haun-online.de> Message-ID: <015601cc25df$0dda5950$298f0bf0$@cogeco.net> Are you thinking of releasing 1.8.0 this weekend? I will get the news post ready for then. It will basically be a recap with more developer specific changes found in the read more section and the pages they can go to find more information on each subject. Tom -----Original Message----- From: geeklog-devel-bounces at lists.geeklog.net [mailto:geeklog-devel-bounces at lists.geeklog.net] On Behalf Of Dirk Haun Sent: June-02-11 9:10 AM To: Geeklog Development Subject: Re: [geeklog-devel] More automation (was: Feature freeze) > And removing a tag (like the fake geeklog_1_8_0rc2) also works as > expected, i.e. it doesn't do anything :) > > So this part of the release process is ready now ... Today's geeklog_1_8_0rc2 tag was real :) --- snip --- New release tagged: geeklog_1_8_0rc2, i.e. geeklog-1.8.0rc2 Checking out geeklog_1_8_0rc2 ... requesting all changes adding changesets adding manifests adding file changes added 7913 changesets with 25821 changes to 2945 files updating to branch HEAD 1820 files updated, 0 files merged, 0 files removed, 0 files unresolved Preparing geeklog-1.8.0rc2 archive ... geeklog-1.8.0rc2.tar.gz created. Sent geeklog-1.8.0rc2.tar.gz to www.geeklog.net Archiving artifacts Recording fingerprints No emails were triggered. Finished: SUCCESS --- snip --- http://project.geeklog.net:8080/job/geeklog-release/40/console So all I had to do on the other end was to write the release announcement and approve the file from the File Management's submission queue. This is such a huge improvement over the previous process which required half a dozen manual steps ... bye, Dirk _______________________________________________ geeklog-devel mailing list geeklog-devel at lists.geeklog.net http://eight.pairlist.net/mailman/listinfo/geeklog-devel From dirk at haun-online.de Thu Jun 9 15:14:27 2011 From: dirk at haun-online.de (Dirk Haun) Date: Thu, 9 Jun 2011 21:14:27 +0200 Subject: [geeklog-devel] More automation (was: Feature freeze) In-Reply-To: <015601cc25df$0dda5950$298f0bf0$@cogeco.net> References: <57C39EB5-B1D6-402F-A443-80056A25B04C@haun-online.de> <7C5262C3-AC61-448B-8252-2F7E5B4D2FD3@haun-online.de> <2A011EE6-9E49-4CC3-BAA9-F1741ECFDF25@haun-online.de> <015601cc25df$0dda5950$298f0bf0$@cogeco.net> Message-ID: <8924207E-C5E8-460F-B852-8E1D56DEDEBB@haun-online.de> Tom wrote: > Are you thinking of releasing 1.8.0 this weekend? Yep. It's about time. I've updated geeklog.info and another site to rc2 and everything seems to be working fine. Anyone aware of any really critical / annoying (new) bugs? > I will get the news post ready for then. It will basically be a recap with > more developer specific changes found in the read more section and the pages > they can go to find more information on each subject. That would be great, thanks. bye, Dirk From websitemaster at cogeco.net Sun Jun 12 13:40:11 2011 From: websitemaster at cogeco.net (Tom) Date: Sun, 12 Jun 2011 13:40:11 -0400 Subject: [geeklog-devel] Geeklog 1.8.0 Released Message-ID: <02fa01cc2927$c7b4f3d0$571edb70$@cogeco.net> Hi all, I just wanted to let everyone know that Geeklog 1.8.0 has been officially released today. http://www.geeklog.net/article.php/Geeklog-1.8.0 Thanks to everyone for their hardwork. Tom From rouslan at placella.com Sun Jun 12 15:05:27 2011 From: rouslan at placella.com (Rouslan Placella) Date: Sun, 12 Jun 2011 20:05:27 +0100 Subject: [geeklog-devel] Geeklog 1.8.0 Released In-Reply-To: <02fa01cc2927$c7b4f3d0$571edb70$@cogeco.net> References: <02fa01cc2927$c7b4f3d0$571edb70$@cogeco.net> Message-ID: <1307905527.2165.0.camel@roccivic-pc> On Sun, 2011-06-12 at 13:40 -0400, Tom wrote: > Hi all, > > I just wanted to let everyone know that Geeklog 1.8.0 has been officially > released today. > > http://www.geeklog.net/article.php/Geeklog-1.8.0 > > Thanks to everyone for their hardwork. > > Tom Maybe this should be cross-posted on geeklog-announce mailing list? Rouslan From dirk at haun-online.de Sun Jun 12 15:43:59 2011 From: dirk at haun-online.de (Dirk Haun) Date: Sun, 12 Jun 2011 21:43:59 +0200 Subject: [geeklog-devel] Geeklog 1.8.0 Released In-Reply-To: <1307905527.2165.0.camel@roccivic-pc> References: <02fa01cc2927$c7b4f3d0$571edb70$@cogeco.net> <1307905527.2165.0.camel@roccivic-pc> Message-ID: Rouslan Placella wrote: > Maybe this should be cross-posted on geeklog-announce mailing list? Tom tried, but the list was configured super-strict and wouldn't let him :) I see the announcement in the archives now but haven't received a copy myself yet: http://eight.pairlist.net/pipermail/geeklog-announce/2011-June/thread.html It is obviously a good idea that we're testing these things ... bye, Dirk From dirk at haun-online.de Mon Jun 13 15:20:30 2011 From: dirk at haun-online.de (Dirk Haun) Date: Mon, 13 Jun 2011 21:20:30 +0200 Subject: [geeklog-devel] MySQLi Message-ID: <9A475899-4B57-4EA6-8D1B-14162B823EAB@haun-online.de> I have been playing around with patch #1303, which adds MySQLi support[1]. To be honest, I don't see any change in performance one way or another, at least not with the kinds of requests I was testing it with. Having said that: MySQLi is the recommended API for MySQL 4.1 and later. Plus things can only get better once we understand it a bit better. Since MySQLi is an extension, it might not be present (although that's unlikely). So we have to check every time which of the two APIs we've got to use. To make this a little easier, I would like to suggest that we raise the minimum required MySQL version to 4.1.3 (from 4.0.18). Then we can simply check for existence of the MySQLi class and use that if present or fall back to the old API otherwise. To put things into perspective: Support for MySQL 4.1 ended 1.5 years ago (2009-12-31) - and we would only make it the mimimum requirement now. Even RHEL 4 - one of the Linux distros for which we keep PHP 4 support around in the 1.7.x branch - shipped with MySQL 4.1. Any objections or concerns? bye, Dirk [1] http://project.geeklog.net/tracking/view.php?id=1303 From rouslan at placella.com Mon Jun 13 15:33:53 2011 From: rouslan at placella.com (Rouslan Placella) Date: Mon, 13 Jun 2011 20:33:53 +0100 Subject: [geeklog-devel] MySQLi In-Reply-To: <9A475899-4B57-4EA6-8D1B-14162B823EAB@haun-online.de> References: <9A475899-4B57-4EA6-8D1B-14162B823EAB@haun-online.de> Message-ID: <1307993633.2008.52.camel@roccivic-pc> On Mon, 2011-06-13 at 21:20 +0200, Dirk Haun wrote: > I have been playing around with patch #1303, which adds MySQLi support[1]. To be honest, I don't see any change in performance one way or another, at least not with the kinds of requests I was testing it with. > > Having said that: MySQLi is the recommended API for MySQL 4.1 and later. Plus things can only get better once we understand it a bit better. > > Since MySQLi is an extension, it might not be present (although that's unlikely). So we have to check every time which of the two APIs we've got to use. To make this a little easier, I would like to suggest that we raise the minimum required MySQL version to 4.1.3 (from 4.0.18). Then we can simply check for existence of the MySQLi class and use that if present or fall back to the old API otherwise. > > To put things into perspective: Support for MySQL 4.1 ended 1.5 years ago (2009-12-31) - and we would only make it the mimimum requirement now. Even RHEL 4 - one of the Linux distros for which we keep PHP 4 support around in the 1.7.x branch - shipped with MySQL 4.1. > > Any objections or concerns? No objections here. For me, one thing that MySQLi has going for it is the ability to run stored routines (procedures and functions). Though those features were not introduced until MySQL 5.0.2 > bye, Dirk > > [1] http://project.geeklog.net/tracking/view.php?id=1303 > > _______________________________________________ > geeklog-devel mailing list > geeklog-devel at lists.geeklog.net > http://eight.pairlist.net/mailman/listinfo/geeklog-devel From websitemaster at cogeco.net Mon Jun 13 19:00:30 2011 From: websitemaster at cogeco.net (Tom) Date: Mon, 13 Jun 2011 19:00:30 -0400 Subject: [geeklog-devel] MySQLi In-Reply-To: <1307993633.2008.52.camel@roccivic-pc> References: <9A475899-4B57-4EA6-8D1B-14162B823EAB@haun-online.de> <1307993633.2008.52.camel@roccivic-pc> Message-ID: <03ae01cc2a1d$b1790ba0$146b22e0$@cogeco.net> None here either. -----Original Message----- From: geeklog-devel-bounces at lists.geeklog.net [mailto:geeklog-devel-bounces at lists.geeklog.net] On Behalf Of Rouslan Placella Sent: June-13-11 3:34 PM To: geeklog-devel at lists.geeklog.net Subject: Re: [geeklog-devel] MySQLi On Mon, 2011-06-13 at 21:20 +0200, Dirk Haun wrote: > I have been playing around with patch #1303, which adds MySQLi support[1]. To be honest, I don't see any change in performance one way or another, at least not with the kinds of requests I was testing it with. > > Having said that: MySQLi is the recommended API for MySQL 4.1 and later. Plus things can only get better once we understand it a bit better. > > Since MySQLi is an extension, it might not be present (although that's unlikely). So we have to check every time which of the two APIs we've got to use. To make this a little easier, I would like to suggest that we raise the minimum required MySQL version to 4.1.3 (from 4.0.18). Then we can simply check for existence of the MySQLi class and use that if present or fall back to the old API otherwise. > > To put things into perspective: Support for MySQL 4.1 ended 1.5 years ago (2009-12-31) - and we would only make it the mimimum requirement now. Even RHEL 4 - one of the Linux distros for which we keep PHP 4 support around in the 1.7.x branch - shipped with MySQL 4.1. > > Any objections or concerns? No objections here. For me, one thing that MySQLi has going for it is the ability to run stored routines (procedures and functions). Though those features were not introduced until MySQL 5.0.2 > bye, Dirk > > [1] http://project.geeklog.net/tracking/view.php?id=1303 > > _______________________________________________ > geeklog-devel mailing list > geeklog-devel at lists.geeklog.net > http://eight.pairlist.net/mailman/listinfo/geeklog-devel _______________________________________________ geeklog-devel mailing list geeklog-devel at lists.geeklog.net http://eight.pairlist.net/mailman/listinfo/geeklog-devel From rouslan at placella.com Tue Jun 14 14:14:01 2011 From: rouslan at placella.com (Rouslan Placella) Date: Tue, 14 Jun 2011 19:14:01 +0100 Subject: [geeklog-devel] Forum Plugin 2.8.0 BETA1 is out Message-ID: <1308075241.8032.4.camel@roccivic-pc> Hi there, (cross posting from geeklog-modules mailing list) Just to let you know that the Forum Plugin 2.8.0 BETA1 is now available for download at http://code.google.com/p/geeklog/downloads/detail?name=forum_2.8.0b1_1.6.0.tar.gz We would like to encourage everyone to try it out and report any issues that there may be to make the final version better. Many thanks. Rouslan From ironmax at spacequad.com Wed Jun 15 16:56:54 2011 From: ironmax at spacequad.com (Michael Brusletten) Date: Wed, 15 Jun 2011 16:56:54 -0400 Subject: [geeklog-devel] geeklog-devel Digest, Vol 55, Issue 6 References: Message-ID: <000901cc2b9e$c1e1ce50$fe00a8c0@node1> I wanted to make sure this got into the mailing list. I compiled the extension=php_mbstring.dll into php and it upgraded fine. However, after going back to the index page, and looking at the center forum block, it did not have the postings listed properly and when I clicked on the post, it was a blank post with nothing in it. I'll leave it up for now and you can go in and re-run the upgrade and have a look at what I've seen. Michael Resent, because Dirk said it never made it here. ----- Original Message ----- From: "Rouslan Placella" To: "Michael Brusletten" Sent: Wednesday, June 15, 2011 6:37 AM Subject: Re: Fw: Beta of Forum Plugin on Geeklog demo site? > Thanks for reporting this issue, I've filed a bug on our trackerand > hopefully we will have this fixed soon. Thanks for your help :) > > Rouslan > > On Tue, 2011-06-14 at 17:22 -0400, Michael Brusletten wrote: > > Rouslin, > > > > I just seen this on the IRC and wanted to forward this to you on what Dirk > > wrote: > > > > (04:46:23 PM) ironmax: Okay...I guess there is more work to be done on the > > forum beta > > (04:47:01 PM) ironmax: Call to undefined function mb_ereg_replace() in > > \public_html\forum\index.php on line 1002 > > 17:10 > > (05:12:50 PM) dhaun: multi-byte extension not compiled into PHP? tell 'em to > > use lib-mbyte.php instead of calling those directly :) > > (05:12:54 PM) dhaun left the room (quit: Quit: Leaving.). > > > > > > Michael > > > > ----- Original Message ----- > > From: "Michael Brusletten" > > To: "Rouslan Placella" ; "Dirk Haun" > > > > Sent: Tuesday, June 14, 2011 5:05 PM > > Subject: Re: Beta of Forum Plugin on Geeklog demo site? > > > > > > > Rouslin and Dirk, > > > > > > The forum installed and upgraded as expected okay with proper messages, > > but > > > after clicking on the home page, I got a blank page. I was using the > > > default theme when I upgraded, so there is no question there. I did catch > > > quite a few errors in the php error log though. See below for hints. > > > > > > For now I reverted back to 2.7.4 > > > > > > Michael > > > ------------ > > > > > > [14-Jun-2011 16:44:24] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:32] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:36] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:46] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:51] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:01] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:06] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:17] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:34] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\public_html\forum\index.php > > on > > > line 1002 > > > > > > -------------------- > > > > > > ----- Original Message ----- > > > From: "Dirk Haun" > > > To: "Michael Brusletten" > > > Cc: "Rouslan Placella" > > > Sent: Tuesday, June 14, 2011 3:38 PM > > > Subject: Re: Beta of Forum Plugin on Geeklog demo site? > > > > > > > > > Hey Michael, > > > > > > as Rouslan already said, this is based on Blaine's Forum plugin - also see > > > the post on geeklog.net. > > > > > > And I think installing it on the demo site would be a good way to demo and > > > test it, if it doesn't cause you too much trouble (I guess there will be a > > > few updates before the final release). > > > > > > bye, Dirk > > > > > > > > > Am 14.06.2011 um 21:16 Uhr schrieb Rouslan Placella: > > > > > > > Hi Michael (and Dirk), > > > > > > > > yes, this originally was Blaine's plugin and we are just working on top > > > > of that. It should be a pretty painless upgrade, too, from older > > > > versions. > > > > > > > > Rouslan > > > > > > > > > > > > On Tue, 2011-06-14 at 15:08 -0400, Michael Brusletten wrote: > > > >> Rouslan, > > > >> > > > >> I don't have a problem with this. I do however need to know if this is > > > the > > > >> continuation of the forum software that was created by Blaine Lang ----- Original Message ----- From: To: Sent: Wednesday, June 15, 2011 10:00 AM Subject: geeklog-devel Digest, Vol 55, Issue 6 > Send geeklog-devel mailing list submissions to > geeklog-devel at lists.geeklog.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://eight.pairlist.net/mailman/listinfo/geeklog-devel > or, via email, send a message with subject or body 'help' to > geeklog-devel-request at lists.geeklog.net > > You can reach the person managing the list at > geeklog-devel-owner at lists.geeklog.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of geeklog-devel digest..." > > > Today's Topics: > > 1. Forum Plugin 2.8.0 BETA1 is out (Rouslan Placella) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 14 Jun 2011 19:14:01 +0100 > From: Rouslan Placella > Subject: [geeklog-devel] Forum Plugin 2.8.0 BETA1 is out > To: geeklog-devel at lists.geeklog.net > Message-ID: <1308075241.8032.4.camel at roccivic-pc> > Content-Type: text/plain; charset="UTF-8" > > Hi there, > > (cross posting from geeklog-modules mailing list) > > Just to let you know that the Forum Plugin 2.8.0 BETA1 is now available > for download at > http://code.google.com/p/geeklog/downloads/detail?name=forum_2.8.0b1_1.6.0.tar.gz > > We would like to encourage everyone to try it out and report any issues > that there may be to make the final version better. Many thanks. > > Rouslan > > > > ------------------------------ > > _______________________________________________ > geeklog-devel mailing list > geeklog-devel at lists.geeklog.net > http://eight.pairlist.net/mailman/listinfo/geeklog-devel > > > End of geeklog-devel Digest, Vol 55, Issue 6 > ******************************************** > From ironmax at spacequad.com Wed Jun 15 16:38:22 2011 From: ironmax at spacequad.com (Michael Brusletten) Date: Wed, 15 Jun 2011 16:38:22 -0400 Subject: [geeklog-devel] Fw: Fw: Beta of Forum Plugin on Geeklog demo site? Message-ID: <002101cc2b9c$2b224320$fe00a8c0@node1> I wanted to make sure this got into the mailing list. I compiled the extension=php_mbstring.dll into php and it upgraded fine. However, after going back to the index page, and looking at the center forum block, it did not have the postings listed properly and when I clicked on the post, it was a blank post with nothing in it. I'll leave it up for now and you can go in and re-run the upgrade and have a look at what I've seen. Michael ----- Original Message ----- From: "Rouslan Placella" To: "Michael Brusletten" Sent: Wednesday, June 15, 2011 6:37 AM Subject: Re: Fw: Beta of Forum Plugin on Geeklog demo site? > Thanks for reporting this issue, I've filed a bug on our trackerand > hopefully we will have this fixed soon. Thanks for your help :) > > Rouslan > > On Tue, 2011-06-14 at 17:22 -0400, Michael Brusletten wrote: > > Rouslin, > > > > I just seen this on the IRC and wanted to forward this to you on what Dirk > > wrote: > > > > (04:46:23 PM) ironmax: Okay...I guess there is more work to be done on the > > forum beta > > (04:47:01 PM) ironmax: Call to undefined function mb_ereg_replace() in > > \public_html\forum\index.php on line 1002 > > 17:10 > > (05:12:50 PM) dhaun: multi-byte extension not compiled into PHP? tell 'em to > > use lib-mbyte.php instead of calling those directly :) > > (05:12:54 PM) dhaun left the room (quit: Quit: Leaving.). > > > > > > Michael > > > > ----- Original Message ----- > > From: "Michael Brusletten" > > To: "Rouslan Placella" ; "Dirk Haun" > > > > Sent: Tuesday, June 14, 2011 5:05 PM > > Subject: Re: Beta of Forum Plugin on Geeklog demo site? > > > > > > > Rouslin and Dirk, > > > > > > The forum installed and upgraded as expected okay with proper messages, > > but > > > after clicking on the home page, I got a blank page. I was using the > > > default theme when I upgraded, so there is no question there. I did catch > > > quite a few errors in the php error log though. See below for hints. > > > > > > For now I reverted back to 2.7.4 > > > > > > Michael > > > ------------ > > > > > > [14-Jun-2011 16:44:24] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:32] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:36] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:46] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:44:51] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:01] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:06] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:17] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > on > > > line 1239 > > > > > > [14-Jun-2011 16:45:34] PHP Fatal error: Call to undefined function > > > mb_ereg_replace() in E:\WebSites\demo_geeklog\public_html\forum\index.php > > on > > > line 1002 > > > > > > -------------------- > > > > > > ----- Original Message ----- > > > From: "Dirk Haun" > > > To: "Michael Brusletten" > > > Cc: "Rouslan Placella" > > > Sent: Tuesday, June 14, 2011 3:38 PM > > > Subject: Re: Beta of Forum Plugin on Geeklog demo site? > > > > > > > > > Hey Michael, > > > > > > as Rouslan already said, this is based on Blaine's Forum plugin - also see > > > the post on geeklog.net. > > > > > > And I think installing it on the demo site would be a good way to demo and > > > test it, if it doesn't cause you too much trouble (I guess there will be a > > > few updates before the final release). > > > > > > bye, Dirk > > > > > > > > > Am 14.06.2011 um 21:16 Uhr schrieb Rouslan Placella: > > > > > > > Hi Michael (and Dirk), > > > > > > > > yes, this originally was Blaine's plugin and we are just working on top > > > > of that. It should be a pretty painless upgrade, too, from older > > > > versions. > > > > > > > > Rouslan > > > > > > > > > > > > On Tue, 2011-06-14 at 15:08 -0400, Michael Brusletten wrote: > > > >> Rouslan, > > > >> > > > >> I don't have a problem with this. I do however need to know if this is > > > the > > > >> continuation of the forum software that was created by Blaine Lang of > > > >> Portalparts.com. If not, then I will definately need to get permission > > > from > > > >> Dirk Haun (dhaun) to proceed. If it is, I take it that this will be > > the > > > >> continuation of his work and hope to see great new improvements and > > > >> additions to the plugin. > > > >> > > > >> Dirk, your thoughts on this? > > > >> > > > >> Michael > > > >> > > > >> ----- Original Message ----- > > > >> From: "Rouslan Placella" > > > >> To: "Michael" > > > >> Sent: Tuesday, June 14, 2011 1:23 PM > > > >> Subject: Beta of Forum Plugin on Geeklog demo site? > > > >> > > > >> > > > >>> Hi there, > > > >>> > > > >>> > > > >>> > > > >>> I remember having a chat with you on IRC some time ago and that you > > > >> offered to host the beta version of the Forum plugin whenever it was > > > >> released on the Geeklog Demo site (If I didn't dream that, lol). > > > >>> > > > >>> > > > >>> > > > >>> Well, we did release a first beta and it is now available for download > > > >> here: > > > >> > > > > > http://code.google.com/p/geeklog/downloads/detail?name=forum_2.8.0b1_1.6.0.tar.gz > > > >>> > > > >>> > > > >>> > > > >>> It would be great if you could find some time to try to install it on > > > the > > > >> Geeklog demo site. > > > >>> > > > >>> > > > >>> > > > >>> Thanks for your help with this, it's much appreciated. > > > >>> > > > >>> > > > >>> > > > >>> Bye, > > > >>> > > > >>> Rouslan > > > >>> > > > >> > > > > > > > > > > > > > > > > > > > From rouslan at placella.com Wed Jun 15 17:17:32 2011 From: rouslan at placella.com (Rouslan Placella) Date: Wed, 15 Jun 2011 22:17:32 +0100 Subject: [geeklog-devel] geeklog-devel Digest, Vol 55, Issue 6 In-Reply-To: <000901cc2b9e$c1e1ce50$fe00a8c0@node1> References: <000901cc2b9e$c1e1ce50$fe00a8c0@node1> Message-ID: <1308172652.2162.31.camel@roccivic-pc> Among other issues, it looks really weird that all images are loaded from incorrect locations. For example: http://demo.geeklog.net/layout/professional/forum/image_set/status_yes.gif should in fact be: http://demo.geeklog.net/forum/image_set/status_yes.png Not only the path is wrong, but even the extension is incorrect x_X Rouslan On Wed, 2011-06-15 at 16:56 -0400, Michael Brusletten wrote: > I wanted to make sure this got into the mailing list. > > I compiled the extension=php_mbstring.dll into php and it upgraded fine. > However, after going back to the index page, and looking at the center forum > block, it did not have the postings listed properly and when I clicked on > the post, it was a blank post with nothing in it. I'll leave it up for now > and you can go in and re-run the upgrade and have a look at what I've seen. > > Michael > > Resent, because Dirk said it never made it here. > > > ----- Original Message ----- > From: "Rouslan Placella" > To: "Michael Brusletten" > Sent: Wednesday, June 15, 2011 6:37 AM > Subject: Re: Fw: Beta of Forum Plugin on Geeklog demo site? > > > > Thanks for reporting this issue, I've filed a bug on our trackerand > > hopefully we will have this fixed soon. Thanks for your help :) > > > > Rouslan > > > > On Tue, 2011-06-14 at 17:22 -0400, Michael Brusletten wrote: > > > Rouslin, > > > > > > I just seen this on the IRC and wanted to forward this to you on what > Dirk > > > wrote: > > > > > > (04:46:23 PM) ironmax: Okay...I guess there is more work to be done on > the > > > forum beta > > > (04:47:01 PM) ironmax: Call to undefined function mb_ereg_replace() in > > > \public_html\forum\index.php on line 1002 > > > 17:10 > > > (05:12:50 PM) dhaun: multi-byte extension not compiled into PHP? tell > 'em to > > > use lib-mbyte.php instead of calling those directly :) > > > (05:12:54 PM) dhaun left the room (quit: Quit: Leaving.). > > > > > > > > > Michael > > > > > > ----- Original Message ----- > > > From: "Michael Brusletten" > > > To: "Rouslan Placella" ; "Dirk Haun" > > > > > > Sent: Tuesday, June 14, 2011 5:05 PM > > > Subject: Re: Beta of Forum Plugin on Geeklog demo site? > > > > > > > > > > Rouslin and Dirk, > > > > > > > > The forum installed and upgraded as expected okay with proper > messages, > > > but > > > > after clicking on the home page, I got a blank page. I was using the > > > > default theme when I upgraded, so there is no question there. I did > catch > > > > quite a few errors in the php error log though. See below for hints. > > > > > > > > For now I reverted back to 2.7.4 > > > > > > > > Michael > > > > ------------ > > > > > > > > [14-Jun-2011 16:44:24] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:44:32] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:44:36] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:44:46] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:44:51] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:45:01] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:45:06] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:45:17] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc > > > on > > > > line 1239 > > > > > > > > [14-Jun-2011 16:45:34] PHP Fatal error: Call to undefined function > > > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\public_html\forum\index.php > > > on > > > > line 1002 > > > > > > > > -------------------- > > > > > > > > ----- Original Message ----- > > > > From: "Dirk Haun" > > > > To: "Michael Brusletten" > > > > Cc: "Rouslan Placella" > > > > Sent: Tuesday, June 14, 2011 3:38 PM > > > > Subject: Re: Beta of Forum Plugin on Geeklog demo site? > > > > > > > > > > > > Hey Michael, > > > > > > > > as Rouslan already said, this is based on Blaine's Forum plugin - also > see > > > > the post on geeklog.net. > > > > > > > > And I think installing it on the demo site would be a good way to demo > and > > > > test it, if it doesn't cause you too much trouble (I guess there will > be a > > > > few updates before the final release). > > > > > > > > bye, Dirk > > > > > > > > > > > > Am 14.06.2011 um 21:16 Uhr schrieb Rouslan Placella: > > > > > > > > > Hi Michael (and Dirk), > > > > > > > > > > yes, this originally was Blaine's plugin and we are just working on > top > > > > > of that. It should be a pretty painless upgrade, too, from older > > > > > versions. > > > > > > > > > > Rouslan > > > > > > > > > > > > > > > On Tue, 2011-06-14 at 15:08 -0400, Michael Brusletten wrote: > > > > >> Rouslan, > > > > >> > > > > >> I don't have a problem with this. I do however need to know if > this is > > > > the > > > > >> continuation of the forum software that was created by Blaine Lang > > ----- Original Message ----- > From: > To: > Sent: Wednesday, June 15, 2011 10:00 AM > Subject: geeklog-devel Digest, Vol 55, Issue 6 > > > > Send geeklog-devel mailing list submissions to > > geeklog-devel at lists.geeklog.net > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://eight.pairlist.net/mailman/listinfo/geeklog-devel > > or, via email, send a message with subject or body 'help' to > > geeklog-devel-request at lists.geeklog.net > > > > You can reach the person managing the list at > > geeklog-devel-owner at lists.geeklog.net > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of geeklog-devel digest..." > > > > > > Today's Topics: > > > > 1. Forum Plugin 2.8.0 BETA1 is out (Rouslan Placella) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Tue, 14 Jun 2011 19:14:01 +0100 > > From: Rouslan Placella > > Subject: [geeklog-devel] Forum Plugin 2.8.0 BETA1 is out > > To: geeklog-devel at lists.geeklog.net > > Message-ID: <1308075241.8032.4.camel at roccivic-pc> > > Content-Type: text/plain; charset="UTF-8" > > > > Hi there, > > > > (cross posting from geeklog-modules mailing list) > > > > Just to let you know that the Forum Plugin 2.8.0 BETA1 is now available > > for download at > > > http://code.google.com/p/geeklog/downloads/detail?name=forum_2.8.0b1_1.6.0.tar.gz > > > > We would like to encourage everyone to try it out and report any issues > > that there may be to make the final version better. Many thanks. > > > > Rouslan > > > > > > > > ------------------------------ > > > > _______________________________________________ > > geeklog-devel mailing list > > geeklog-devel at lists.geeklog.net > > http://eight.pairlist.net/mailman/listinfo/geeklog-devel > > > > > > End of geeklog-devel Digest, Vol 55, Issue 6 > > ******************************************** > > > > _______________________________________________ > geeklog-devel mailing list > geeklog-devel at lists.geeklog.net > http://eight.pairlist.net/mailman/listinfo/geeklog-devel From cordiste at free.fr Thu Jun 16 03:16:43 2011 From: cordiste at free.fr (cordiste) Date: Thu, 16 Jun 2011 09:16:43 +0200 Subject: [geeklog-devel] Fw: Fw: Beta of Forum Plugin on Geeklog demo site? In-Reply-To: <002101cc2b9c$2b224320$fe00a8c0@node1> References: <002101cc2b9c$2b224320$fe00a8c0@node1> Message-ID: > the center forum block, it did not have the postings listed properly Try to remove the forum folder from public_html/layout/yourtheme folder Ben 2011/6/15 Michael Brusletten : > I wanted to make sure this got into the mailing list. > > I compiled the extension=php_mbstring.dll into php and it upgraded fine. > However, after going back to the index page, and looking at the center forum > block, it did not have the postings listed properly and when I clicked on > the post, it was a blank post with nothing in it. ?I'll leave it up for now > and you can go in and re-run the upgrade and have a look at what I've seen. > > Michael > > > > ----- Original Message ----- > From: "Rouslan Placella" > To: "Michael Brusletten" > Sent: Wednesday, June 15, 2011 6:37 AM > Subject: Re: Fw: Beta of Forum Plugin on Geeklog demo site? > > >> Thanks for reporting this issue, I've filed a bug on our trackerand >> hopefully we will have this fixed soon. Thanks for your help :) >> >> Rouslan >> >> On Tue, 2011-06-14 at 17:22 -0400, Michael Brusletten wrote: >> > Rouslin, >> > >> > I just seen this on the IRC and wanted to forward this to you on what > Dirk >> > wrote: >> > >> > (04:46:23 PM) ironmax: Okay...I guess there is more work to be done on > the >> > forum beta >> > (04:47:01 PM) ironmax: Call to undefined function mb_ereg_replace() in >> > \public_html\forum\index.php on line 1002 >> > 17:10 >> > (05:12:50 PM) dhaun: multi-byte extension not compiled into PHP? tell > 'em to >> > use lib-mbyte.php instead of calling those directly :) >> > (05:12:54 PM) dhaun left the room (quit: Quit: Leaving.). >> > >> > >> > Michael >> > >> > ----- Original Message ----- >> > From: "Michael Brusletten" >> > To: "Rouslan Placella" ; "Dirk Haun" >> > >> > Sent: Tuesday, June 14, 2011 5:05 PM >> > Subject: Re: Beta of Forum Plugin on Geeklog demo site? >> > >> > >> > > Rouslin and Dirk, >> > > >> > > The forum installed and upgraded as expected okay with proper > messages, >> > but >> > > after clicking on the home page, I got a blank page. ?I was using the >> > > default theme when I upgraded, so there is no question there. ?I did > catch >> > > quite a few errors in the php error log though. ?See below for hints. >> > > >> > > For now I reverted back to 2.7.4 >> > > >> > > Michael >> > > ------------ >> > > >> > > [14-Jun-2011 16:44:24] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:44:32] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:44:36] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:44:46] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:44:51] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:45:01] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:45:06] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:45:17] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\plugins\forum\functions.inc >> > on >> > > line 1239 >> > > >> > > [14-Jun-2011 16:45:34] PHP Fatal error: ?Call to undefined function >> > > mb_ereg_replace() in > E:\WebSites\demo_geeklog\public_html\forum\index.php >> > on >> > > line 1002 >> > > >> > > -------------------- >> > > >> > > ----- Original Message ----- >> > > From: "Dirk Haun" >> > > To: "Michael Brusletten" >> > > Cc: "Rouslan Placella" >> > > Sent: Tuesday, June 14, 2011 3:38 PM >> > > Subject: Re: Beta of Forum Plugin on Geeklog demo site? >> > > >> > > >> > > Hey Michael, >> > > >> > > as Rouslan already said, this is based on Blaine's Forum plugin - also > see >> > > the post on geeklog.net. >> > > >> > > And I think installing it on the demo site would be a good way to demo > and >> > > test it, if it doesn't cause you too much trouble (I guess there will > be a >> > > few updates before the final release). >> > > >> > > bye, Dirk >> > > >> > > >> > > Am 14.06.2011 um 21:16 Uhr schrieb Rouslan Placella: >> > > >> > > > Hi Michael (and Dirk), >> > > > >> > > > yes, this originally was Blaine's plugin and we are just working on > top >> > > > of that. It should be a pretty painless upgrade, too, from older >> > > > versions. >> > > > >> > > > Rouslan >> > > > >> > > > >> > > > On Tue, 2011-06-14 at 15:08 -0400, Michael Brusletten wrote: >> > > >> Rouslan, >> > > >> >> > > >> I don't have a problem with this. ?I do however need to know if > this is >> > > the >> > > >> continuation of the forum software that was created by Blaine Lang > of >> > > >> Portalparts.com. ?If not, then I will definately need to get > permission >> > > from >> > > >> Dirk Haun (dhaun) to proceed. ?If it is, I take it that this will > be >> > the >> > > >> continuation of his work and hope to see great new improvements and >> > > >> additions to the plugin. >> > > >> >> > > >> Dirk, your thoughts on this? >> > > >> >> > > >> Michael >> > > >> >> > > >> ----- Original Message ----- >> > > >> From: "Rouslan Placella" >> > > >> To: "Michael" >> > > >> Sent: Tuesday, June 14, 2011 1:23 PM >> > > >> Subject: Beta of Forum Plugin on Geeklog demo site? >> > > >> >> > > >> >> > > >>> Hi there, >> > > >>> >> > > >>> >> > > >>> >> > > >>> I remember having a chat with you on IRC some time ago and that > you >> > > >> offered to host the beta version of the Forum plugin whenever it > was >> > > >> released on the Geeklog Demo site (If I didn't dream that, lol). >> > > >>> >> > > >>> >> > > >>> >> > > >>> Well, we did release a first beta and it is now available for > download >> > > >> here: >> > > >> >> > > >> > > http://code.google.com/p/geeklog/downloads/detail?name=forum_2.8.0b1_1.6.0.tar.gz >> > > >>> >> > > >>> >> > > >>> >> > > >>> It would be great if you could find some time to try to install it > on >> > > the >> > > >> Geeklog demo site. >> > > >>> >> > > >>> >> > > >>> >> > > >>> Thanks for your help with this, it's much appreciated. >> > > >>> >> > > >>> >> > > >>> >> > > >>> Bye, >> > > >>> >> > > >>> Rouslan >> > > >>> >> > > >> >> > > > >> > > > >> > > >> > > >> > >> >> >> > > _______________________________________________ > geeklog-devel mailing list > geeklog-devel at lists.geeklog.net > http://eight.pairlist.net/mailman/listinfo/geeklog-devel > > From ironmax at spacequad.com Thu Jun 16 07:35:47 2011 From: ironmax at spacequad.com (Michael Brusletten) Date: Thu, 16 Jun 2011 07:35:47 -0400 Subject: [geeklog-devel] geeklog-devel Digest, Vol 55, Issue 7 References: Message-ID: <000901cc2c19$8943aca0$fe00a8c0@node1> Geeklog is setup correctly on the demo site. In fact, its setup exactly as it is in the archive as far as directory structure goes. As for the forum goes, version 2.7.4 and before had no issues with the structure. So this leads me to conclude that version 2.8.0 beta has issues in its directory structure. Rouslan has complete access to the site to try and figure this out. After rereading your post below, I started over and from the 2.7.4 archived files and database and did the upgrade. Still ran into the problem with the forum looking strange. So I renamed/removed the theme/forum directory and did a refresh on the home index and it appears that it looks good now. So I'm thinking that the the upgrade needs to remove the theme's forum directory in order for this to be a sucessful upgrade. Michael > Message: 4 > Date: Thu, 16 Jun 2011 09:16:43 +0200 > From: cordiste > Subject: Re: [geeklog-devel] Fw: Fw: Beta of Forum Plugin on Geeklog > demo site? > To: Geeklog Development > Message-ID: > Content-Type: text/plain; charset=ISO-8859-1 > > > the center forum block, it did not have the postings listed properly > > Try to remove the forum folder from public_html/layout/yourtheme folder > > Ben > > 2011/6/15 Michael Brusletten : > > I wanted to make sure this got into the mailing list. > > > > I compiled the extension=php_mbstring.dll into php and it upgraded fine. > > However, after going back to the index page, and looking at the center forum > > block, it did not have the postings listed properly and when I clicked on > > the post, it was a blank post with nothing in it. ?I'll leave it up for now > > and you can go in and re-run the upgrade and have a look at what I've seen. > > > > Michael > > > > > > From rouslan at placella.com Thu Jun 16 07:49:36 2011 From: rouslan at placella.com (Rouslan Placella) Date: Thu, 16 Jun 2011 12:49:36 +0100 Subject: [geeklog-devel] geeklog-devel Digest, Vol 55, Issue 7 In-Reply-To: <000901cc2c19$8943aca0$fe00a8c0@node1> References: <000901cc2c19$8943aca0$fe00a8c0@node1> Message-ID: <1308224976.1982.15.camel@roccivic-pc> The problem is at the top of the functions.inc file in the forum, where some paths are being overridden (for no good reason), it looks like it's some legacy code from the old versions that was never flushed. I'll check-in a fix for that later today. By the way, the forum on the demo server is working fine for the professional and the professional_css themes already (and I'm fixing all the other ones now). Rouslan On Thu, 2011-06-16 at 07:35 -0400, Michael Brusletten wrote: > Geeklog is setup correctly on the demo site. In fact, its setup exactly as > it is in the archive as far as directory structure goes. As for the forum > goes, version 2.7.4 and before had no issues with the structure. So this > leads me to conclude that version 2.8.0 beta has issues in its directory > structure. > > Rouslan has complete access to the site to try and figure this out. > > After rereading your post below, I started over and from the 2.7.4 archived > files and database and did the upgrade. Still ran into the problem with the > forum looking strange. So I renamed/removed the theme/forum directory and > did a refresh on the home index and it appears that it looks good now. So > I'm thinking that the the upgrade needs to remove the theme's forum > directory in order for this to be a sucessful upgrade. > > Michael > > > > Message: 4 > > Date: Thu, 16 Jun 2011 09:16:43 +0200 > > From: cordiste > > Subject: Re: [geeklog-devel] Fw: Fw: Beta of Forum Plugin on Geeklog > > demo site? > > To: Geeklog Development > > Message-ID: > > Content-Type: text/plain; charset=ISO-8859-1 > > > > > the center forum block, it did not have the postings listed properly > > > > Try to remove the forum folder from public_html/layout/yourtheme folder > > > > Ben > > > > 2011/6/15 Michael Brusletten : > > > I wanted to make sure this got into the mailing list. > > > > > > I compiled the extension=php_mbstring.dll into php and it upgraded fine. > > > However, after going back to the index page, and looking at the center > forum > > > block, it did not have the postings listed properly and when I clicked > on > > > the post, it was a blank post with nothing in it. ?I'll leave it up for > now > > > and you can go in and re-run the upgrade and have a look at what I've > seen. > > > > > > Michael > > > > > > > > > > > _______________________________________________ > geeklog-devel mailing list > geeklog-devel at lists.geeklog.net > http://eight.pairlist.net/mailman/listinfo/geeklog-devel From member at linkedin.com Sun Jun 19 09:06:32 2011 From: member at linkedin.com (Aaron Zhang via LinkedIn) Date: Sun, 19 Jun 2011 13:06:32 +0000 (UTC) Subject: [geeklog-devel] Invitation to connect on LinkedIn Message-ID: <1726649992.1085559.1308488792854.JavaMail.app@ela4-bed78.prod> LinkedIn ------------ Aaron Zhang requested to add you as a connection on LinkedIn: ------------------------------------------ Manjunath, I'd like to add you to my professional network on LinkedIn. - Aaron Accept invitation from Aaron Zhang http://www.linkedin.com/e/mkye9x-gp40fy8j-2f/drljDwzhigRommQTw7xYbG7u2gJw_mlTl61jzXdGV6MDGEu/blk/I1441823341_3/1BpC5vrmRLoRZcjkkZt5YCpnlOt3RApnhMpmdzgmhxrSNBszYPnP4QcPcOe34Qd359bQRFm3BllRtWbP8TejkNdzgSczcLrCBxbOYWrSlI/EML_comm_afe/ View profile of Aaron Zhang http://www.linkedin.com/e/mkye9x-gp40fy8j-2f/rsn/61230239/2N6K/ ------------------------------------------ -- (c) 2011, LinkedIn Corporation -------------- next part -------------- An HTML attachment was scrubbed... URL: From dirk at haun-online.de Sun Jun 19 09:24:09 2011 From: dirk at haun-online.de (Dirk Haun) Date: Sun, 19 Jun 2011 15:24:09 +0200 Subject: [geeklog-devel] Invitation to connect on LinkedIn In-Reply-To: <1726649992.1085559.1308488792854.JavaMail.app@ela4-bed78.prod> References: <1726649992.1085559.1308488792854.JavaMail.app@ela4-bed78.prod> Message-ID: <32DDFE19-3714-48FB-8BDC-D891BF2CD5AA@haun-online.de> FYI: User has been unsubscribed from the list, banned, and reported for spam (since this wasn't the only invitation from him that ended up in my inbox). bye, Dirk From dirk at haun-online.de Fri Jun 24 07:31:38 2011 From: dirk at haun-online.de (Dirk Haun) Date: Fri, 24 Jun 2011 13:31:38 +0200 Subject: [geeklog-devel] 1.8.1 Message-ID: <20110624133138.9164384jmqc7tuas@webmail.df.eu> I think bug #1368[1] is enough of a reason to roll out a 1.8.1 maintenance release soon-ish. The changes so far[2] did not introduce any changes in the database, templates, or language files. If we keep it that way, an upgrade should be relatively painless. The only risky change is the support for MySQLi - this hasn't really been tested. Thoughts? bye, Dirk [1] http://project.geeklog.net/tracking/view.php?id=1368 [2] http://project.geeklog.net/tracking/changelog_page.php?version_id=30 From rouslan at placella.com Fri Jun 24 07:51:47 2011 From: rouslan at placella.com (Rouslan Placella) Date: Fri, 24 Jun 2011 12:51:47 +0100 Subject: [geeklog-devel] 1.8.1 In-Reply-To: <20110624133138.9164384jmqc7tuas@webmail.df.eu> References: <20110624133138.9164384jmqc7tuas@webmail.df.eu> Message-ID: <1308916307.1804.8.camel@roccivic-pc> On Fri, 2011-06-24 at 13:31 +0200, Dirk Haun wrote: > I think bug #1368[1] is enough of a reason to roll out a 1.8.1 > maintenance release soon-ish. The changes so far[2] did not introduce > any changes in the database, templates, or language files. If we keep > it that way, an upgrade should be relatively painless. > > The only risky change is the support for MySQLi - this hasn't really > been tested. > > Thoughts? > > bye, Dirk Sounds like a good enough reason to me. Rouslan From websitemaster at cogeco.net Fri Jun 24 08:07:50 2011 From: websitemaster at cogeco.net (Tom) Date: Fri, 24 Jun 2011 08:07:50 -0400 Subject: [geeklog-devel] 1.8.1 In-Reply-To: <1308916307.1804.8.camel@roccivic-pc> References: <20110624133138.9164384jmqc7tuas@webmail.df.eu> <1308916307.1804.8.camel@roccivic-pc> Message-ID: <025901cc3267$570753a0$0515fae0$@cogeco.net> That sounds fine. We can always release a 1.8.2 if need be down the road if more bugs get fixed. Dirk did you get to that bug? I see that you have been busy checking stuff in. I was hoping to get to some Geeklog stuff soon but my plate is pretty full at the moment with work (plus I have 2 week family vacation at the end of July). I also need to fix a few forum issues (I hope in a week or so) so I probably will not get back to coding for Geeklog until August. Tom -----Original Message----- From: geeklog-devel-bounces at lists.geeklog.net [mailto:geeklog-devel-bounces at lists.geeklog.net] On Behalf Of Rouslan Placella Sent: June-24-11 7:52 AM To: geeklog-devel at lists.geeklog.net Subject: Re: [geeklog-devel] 1.8.1 On Fri, 2011-06-24 at 13:31 +0200, Dirk Haun wrote: > I think bug #1368[1] is enough of a reason to roll out a 1.8.1 > maintenance release soon-ish. The changes so far[2] did not introduce > any changes in the database, templates, or language files. If we keep > it that way, an upgrade should be relatively painless. > > The only risky change is the support for MySQLi - this hasn't really > been tested. > > Thoughts? > > bye, Dirk Sounds like a good enough reason to me. Rouslan _______________________________________________ geeklog-devel mailing list geeklog-devel at lists.geeklog.net http://eight.pairlist.net/mailman/listinfo/geeklog-devel From dirk at haun-online.de Fri Jun 24 10:47:20 2011 From: dirk at haun-online.de (Dirk Haun) Date: Fri, 24 Jun 2011 16:47:20 +0200 Subject: [geeklog-devel] 1.8.1 In-Reply-To: <025901cc3267$570753a0$0515fae0$@cogeco.net> References: <20110624133138.9164384jmqc7tuas@webmail.df.eu> <1308916307.1804.8.camel@roccivic-pc> <025901cc3267$570753a0$0515fae0$@cogeco.net> Message-ID: <20110624164720.9052387slu8vhl0k@webmail.df.eu> Quoting Tom : > Dirk did you get to that bug? I see that you have been busy checking stuff > in. I haven't tried to understand the original issue yet. Maybe over the weekend ... > I also need to fix a few forum issues (I hope in a week or so) so I > probably will not get back to coding for Geeklog until August. Okay. bye, Dirk